3900 -8300 kW Output
The PO Series burner can operate on oil (Class D light oil, Class G HFO) and is available in standard outputs from 3.3MW to 18MW. The PO Series burner is commonly used on large industrial steam and hot water boilers.
Information
Key Features:
- Available in monoblock design up to P310 or a duoblock design with a floor mounted combustion air fan
- Low NOx Head
- Electronic micro modulation air fuel ratio control with individual valve servo motors as standard
- Variable Speed Drive (VSD) combustion air fan motor
- Air inlet silencer (< 85dBA)
- Oxygen trim for improved efficiency and reduced emissions
- Separate or integrated water level controls for steam boilers
- Data Transfer Interface for BMS control
All P series burners are design and manufactured in accordance with EN267 and EN676.
Technical Data
ModelPO | 310/7.7 | 310/8.0 | 310/8.4 | 310/8.8 | 310/9.2 | |
Output (nett CV) | MW | 6.9 | 7.2 | 7.6 | 7.9 | 8.3 |
Fan Size | kW | 15 | 15 | 15 | 18.5 | 18.5 |
Pump Motor (Distillate Fuel) | kW | 3.0 | 3.0 | 3.0 | 4.0 | 4.0 |
Pump Motor (Residual Fuel) | kW | 3.0 | 3.0 | 3.0 | 4.0 | 4.0 |
Pre-heater (Residual Fuel only) | kW | 36 | 36 | 36 | 48 | 48 |
Electrical Supply | V/Hz | 400/50 | 400/50 | 400/50 | 400/50 | 400/50 |
Oil inlet pressure | psi | 5 to 10 | 5 to 10 | 5 to 10 | 5 to 10 | 5 to 10 |
Fuel pump | T3 / T4 | T3 / T4 | T3 / T4 | T3 / T4 | T3 / T4 | |
Operation | Fully Modulating | Fully Modulating | Fully Modulating | Fully Modulating | Fully Modulating | |
Control Unit | Autoflame Mini Mk7 | Autoflame Mini Mk7 | Autoflame Mini Mk7 | Autoflame Mini Mk7 | Autoflame | |
Turndown | up to 4:1 | up to 4:1 | up to 4:1 | up to 4:1 | up to 4:1 | |
Flame Monitor | UV Sensor | UV Sensor | UV Sensor | UV Sensor | UV Sensor | |
Flame tube lengths | mm | 430/610 | 430/610 | 430/610 | 430/610 | 430/610 |
Noise | dBA | 96 | 96 | 96 | 96 | 96 |
NOx | mg/kWh | 200-280 | 200-280 | 200-280 | 200-280 | 200-280 |
CO | mg/kWh | <110 | <110 | <110 | <110 | <110 |